E936 Galvanic Isolator

What does a Galvanic Isolator do?

The Galvanic Isolator is fitted in the AC incoming Earth Lead interrupting any galvanic circuit and is bonded at the same point as the DC ground on the Boat, providing a most effective and simple way of controlling galvanic corrosion.

Do I need a Galvanic Isolator?

Yes, if you use shorepower to provide a mains supply to your boat.

The latest CE and BMEA Regulations clearly state that AC Earths from Shorepower must be bonded to your Anode. As other Boats in the same vicinity as yours have the same bonding system, the Shorepower Earth Wire is potentially connecting the underwater metal parts from each Boat together. The water between the Vessels acts as an Electrolyte forming an Electrical Cell, which is similar to a low power battery. This will cause metals with a low galvanic number to transfer to metals with a higher galvanic number, which means that Electroplating will occur. This will damage and weaken the metal structure of your Boat.

What does a Galvanic Isolator do?

The Galvanic Isolator is fitted in the AC incoming Earth Lead interrupting any galvanic circuit and is bonded at the same point as the DC ground on the Boat.

It should be noted that earth bonding a legal requirement to ensure safety. It is not only illegal, but also dangerous not to bond AC Earths to metal parts and DC Negative on Board. A common earth point should be used.

  • WORKING VOLTAGE: SHOREPOWER: 115V AC / 230V AC 50 – 60Hz
  • SHOREPOWER RATING: SUITABLE FOR USE WITH RCD PROTECTED SHOREPOWER OUTLETS FROM 10AMPS – 50 AMPS
  • AC CURRENT RATING: 50A CONT, 5KVA FOR 20mSEC
  • VOLTAGE RATING: 600Vac 50/60Hz
  • TEMPERATURE RATING: -40ºC TO +70ºC
  • DIMENSIONS: 70mm X 55mm X 105mm
  • FIXING: 4 POINT FIXING (5.5mm HOLE)FIXING CENTRES: 40mm X 80mm
  • FEATURES: FULLY SEALED CONSTRUCTIONCONFORMS TO EC/73/23/EEC, 2006/95/EC, 89/336/EEC, 2004/108/EC, 2014/30/EC, ISO13297

Learn more with our downloads

Find out all the technical specifications and diagrams for each of our products

Related Products

Other products you may be insterested in.

Speak with our team

Whether your looking to place an order with us or have a technical question for the team, we're on hand to assist in any way we can.

Get in touch for your quote

Find out all the technical specifications and diagrams for each of our products

Yes, all products are manufactured are our factory in Wem, Shropshire

All goods are fully guaranteed for a period of 12 months from the date of delivery. We have an excellent track record for the reliability of all our products. However, in the unlikely event that you had a problem with an item within 12 months, you can return the item to us for investigation. If the item is in fact defective (excluding misuse), it would be repaired / replaced free of charge and returned to you free of charge. If the item is not defective, a report would be provided to the you and the goods returned to you. If you had a problem with an item after 12 months, then you could return it to us for checking and we would advise you of the cost of repair if required. We are available on the telephone Monday – Thursday 8am – 5pm and Friday 8am – 2pm to talk through your installation and give advice if needed.

Yes, for larger orders we can supply Units with bespoke lead lengths in Customer specified colours. We can fit Terminals and Connectors to suit the Customer’s individual needs – these can be free-issued to us or we can supply.

No, we value all Customers so we are happy to supply to an Individual as well as to Multi-National OEMs and Vehicle Manufacturers

Post 1

DC-DC Battery Chargers: Reliable Solutions from Emmtec

Post 3

DC-DC Voltage Converters: Reliable Solutions from Emmtec

Post 2

High-Quality DC Electronic Switches from Emmtec: Built for Performance and Reliability

Contact Us

We'd love to here from you. Give us a call or fill out the short contact form on the right and one of our team will be in touch shortly.

Contact details