E931 12A 12V – 12V Battery Charger (13V Turn On)

12V – 12V BATTERY CHARGER 12AMP

HIGH SPECIFICATION

MANUFACTURED IN THE UK

 

MODELS ALSO AVAILABLE:

24AMP / 36AMP / 48AMP / 60AMP / 72AMP / 84A / 96A

For O.E.M. Customers, Leads can be terminated to suit your requirements

This Battery Charger has been designed using a building block system to obtain the power needed to suit your requirements

E931 12A 12V – 12V Battery Charger (13V Turn On)  

The Charger starts when the voltage reaches approximately 13V.

 

The Battery Charger can be wired in 2 ways:-

 

Wired as a fully automatic Charger

 

The Pink Control Wire is wired directly to the +ve Connection of the 12V Cranking (Donor) Battery to switch the Charger on and off automatically. In this case the Control Wire senses the 12V Cranking (Donor) Battery Voltage and switches the Charger on only when the 12V Cranking (Donor) Battery is being charged.

 

The Unit automatically controls the maximum charge into the 12V Leisure (Recipient) Battery preventing it from becoming over-charged / damaged and prevents the 12V Cranking Battery (Donor Battery) from becoming flat / exhausted.

   

Wired as a manually operated Charger

 

The Pink Control Wire is wired via a Switch to the +ve Connection of the 12V Cranking (Donor) Battery to switch the Charger on and off manually.

In this case the Operator can control when the Battery Charger is switched on or off.

If left on, the Unit will automatically control the maximum charge into the 12V Leisure (Recipient) Battery preventing it from becoming over-charged / damaged and prevent the 12V Cranking Battery (Donor Battery) from becoming flat / exhausted.

   

For O.E.M. Customers, Leads can be terminated to suit your requirements

This Battery Charger has been designed using a building block system to obtain the power needed to suit your requirements

  • PART NO: E931
  • TYPE: SWITCH MODE BATTERY CHARGER
  • Maximum Output (Charging) Current: 12A (PVin = 13V)
  • Output Voltage (V-out): 14.0V ± 0.1V
  • Power Input Voltage (PVin): 11V to 14V
  • Control Input Voltage (CVin): Charger Enabled: >13.3V / Charger Disabled: <12.7V
  • Hysteresis: 0.1V
  • Control Input Current: 50μA
  • Battery Current Drain: 250μA (Charger Disabled)
  • Overload Protection: Yes
  • Thermal shutdown: Yes
  • Polarity Protection: External Fuses Input = 15A / Output = 15A
  • Connections: Flying leads: Red = Positive Input / Black = Negative Input, Output and Control / Blue = Positive Output / Pink = Positive Control
  • Physical Dimensions: 215 x 71 x 55mm
  • Mountings: 4 x Ø 5.5mm Holes
  • Hole Centres: 198 x 40mm
  • Weight: 618g
  • Construction: Anodised Cooling Profile

Learn more with our downloads

Find out all the technical specifications and diagrams for each of our products

Related Products

Other products you may be insterested in.

Speak with our team

Whether your looking to place an order with us or have a technical question for the team, we're on hand to assist in any way we can.

Get in touch for your quote

Find out all the technical specifications and diagrams for each of our products

Yes, all products are manufactured are our factory in Wem, Shropshire

All goods are fully guaranteed for a period of 12 months from the date of delivery. We have an excellent track record for the reliability of all our products. However, in the unlikely event that you had a problem with an item within 12 months, you can return the item to us for investigation. If the item is in fact defective (excluding misuse), it would be repaired / replaced free of charge and returned to you free of charge. If the item is not defective, a report would be provided to the you and the goods returned to you. If you had a problem with an item after 12 months, then you could return it to us for checking and we would advise you of the cost of repair if required. We are available on the telephone Monday – Thursday 8am – 5pm and Friday 8am – 2pm to talk through your installation and give advice if needed.

Yes, for larger orders we can supply Units with bespoke lead lengths in Customer specified colours. We can fit Terminals and Connectors to suit the Customer’s individual needs – these can be free-issued to us or we can supply.

No, we value all Customers so we are happy to supply to an Individual as well as to Multi-National OEMs and Vehicle Manufacturers

Post 1

DC-DC Battery Chargers: Reliable Solutions from Emmtec

Post 3

DC-DC Voltage Converters: Reliable Solutions from Emmtec

Post 2

High-Quality DC Electronic Switches from Emmtec: Built for Performance and Reliability

Contact Us

We'd love to here from you. Give us a call or fill out the short contact form on the right and one of our team will be in touch shortly.

Contact details