This Unit allows a 12Volt Trailer to be towed by a 24Volt Vehicle.
The E805-MK2 Trailer Voltage Converter has been designed to give it compatibility with Vehicles either with or without Engine Management Systems.
The main power for the Unit is taken directly from the Vehicle’s 24V Battery.
The outputs are controlled by the voltage applied to the Input Leads, the current drawn by the Inputs is typically 0.3mA.
There are six independent output circuits, each is Overload and Short Circuit protected.
A bulb failure warning circuit monitors the yellow and green indicator outputs. An output on the pink cable is present when the indicators are on and the bulb is good. The bulb failure indicates when one of the indicator lights has failed. The bulb failure facility is not suitable for LED indicator lights.
THE OUTPUT FROM THE TRAILER VOLTAGE CONVERTER CANNOT BE MEASURED WITH A STANDARD VOLT METER – THIS IS BECAUSE IT IS AN ELECTRONIC SIGNAL AND CAN ONLY BE MEASURED WITH SPECIAL EQUIPMENT
CARE SHOULD BE TAKEN WHEN MOUNTING THE UNIT TO ENSURE THAT IT IS FITTED PREFERABLY INSIDE THE VEHICLE OR IN A SHELTERED POSITION WHICH IS NOT DIRECTLY SUBJECT TO RAIN OR WATER INGRESS FROM WHEEL SPRAY ETC
TYPE: SWITCH MODE STEP DOWN
INPUT VOLTAGE: 24V DC
OUTPUT VOLTAGE: 12V DC
MAX CONT. OUTPUT POWER: 165 WATTS
OVER VOLT. PROTECTION: INTERNAL FUSE
SHORT CIRCUIT PROTECTION: YES
THERMAL SHUTDOWN: YES
EFFICIENCY: > 80%
LEFT HAND PART OF LIGHTING SYSTEM: 30W (REAR LIGHT, SIDE LIGHTS, REG. PLATES)
LEFT HAND FLASHLIGHT: 21 WATT
STOP LIGHTS: 42 WATT
RIGHT HAND PART OF LIGHTING SYSTEM: 30W (REAR LIGHT, SIDE LIGHTS, REG. PLATES)
RIGHT HAND FLASHLIGHT: 21 WATT
REAR FOG LIGHT or REVERSE LIGHT: 42 WATT
BULB FAILURE: 2W max
WEIGHT: 570g
DIMENSIONS: 215mm x 71mm X 55mm
FIXING CENTRES: 199mm X 40mm
HOLE SIZE: 5.5mm (4 HOLES)
CONNECTIONS: FLYING LEADS
CONSTRUCTION: ANODISED COOLING PROFILE
Find out all the technical specifications and diagrams for each of our products
Other products you may be insterested in.
Whether your looking to place an order with us or have a technical question for the team, we're on hand to assist in any way we can.
Find out all the technical specifications and diagrams for each of our products
Yes, all products are manufactured are our factory in Wem, Shropshire
All goods are fully guaranteed for a period of 12 months from the date of delivery. We have an excellent track record for the reliability of all our products. However, in the unlikely event that you had a problem with an item within 12 months, you can return the item to us for investigation. If the item is in fact defective (excluding misuse), it would be repaired / replaced free of charge and returned to you free of charge. If the item is not defective, a report would be provided to the you and the goods returned to you. If you had a problem with an item after 12 months, then you could return it to us for checking and we would advise you of the cost of repair if required. We are available on the telephone Monday – Thursday 8am – 5pm and Friday 8am – 2pm to talk through your installation and give advice if needed.
Yes, for larger orders we can supply Units with bespoke lead lengths in Customer specified colours. We can fit Terminals and Connectors to suit the Customer’s individual needs – these can be free-issued to us or we can supply.
No, we value all Customers so we are happy to supply to an Individual as well as to Multi-National OEMs and Vehicle Manufacturers
We'd love to here from you. Give us a call or fill out the short contact form on the right and one of our team will be in touch shortly.