E1047 12V + 24V Digital Speed Switch LS – 20 – A (3177)

The Unit was designed to switch selected equipment (such as Reversing Cameras) Off at a specific Road Speed.

E1047 12V + 24V Digital Speed Switch

This Speed Switch offers a direct equivalent to the LS – 20 – A (3177)

The Unit was designed to switch selected equipment (such as Reversing Cameras) Off at a specific Road Speed.

The switching off speed is set by selecting a combination of up to 6 switches, giving 64 options between the limits of 2.5km/h (1.6mph) and 107.2km/h (66.6mph).

The switching off speed can be Factory set or adjusted during installation.

The output on this unit is normally on and switches off at the set speed, it is capable of switching 10A.

The tri state Override input can control the output as follows:

Open = normal operation

Switch to positive = output off

Switch to ground = output on

 

Note: Pin 1 and Pin 6 should be wired directly to the appropriate Pins on the Tachograph as indicated.

For example on the DTCO 1381 Tachograph:

· Pin 1 of Speed Switch to Tachograph Plug B Pin B8

· Pin 6 of Speed Switch to Tachograph Plug A Pin A6

  On some Volvo trucks the speed setting may need to be set at half the required speed e.g. if 20mph is required set the speed switch to 10mph. Note: All road speeds assume 4 pulses per metre  
  • Supply Voltage: 10 to 30V
  • Supply Current: < 5mA
  • Output Current: 10A
  • Switch Off Delay (Speed Increasing): 1 second
  • Switch On Delay (Speed Decreasing): < 12ms
  • Switch point Setting (See Table): 6 Way Switch (64 Combinations)
  • Pulse Input:
    • V low < 1.5V
    • V high > 5.5V
    • Pulse Duration > 1.5ms
  • Override Input Resistance: > 5kW to ground
  • Override Input:
    • Open: Operation normal
    • < 1V: Output On
    • > 4.5V: Output Off
  • Case Style: Din Pack, Vertical bracket
  • Dimensions: 94 x 61 x 45 mm
  • Weight: 85g
  • Fixing: 1 x 6.3mm Hole
  • Case Material: Black ABS
  • Bracket Material: Aluminium Alloy

Learn more with our downloads

Find out all the technical specifications and diagrams for each of our products

Related Products

Other products you may be insterested in.

Speak with our team

Whether your looking to place an order with us or have a technical question for the team, we're on hand to assist in any way we can.

Get in touch for your quote

Find out all the technical specifications and diagrams for each of our products

Yes, all products are manufactured are our factory in Wem, Shropshire

All goods are fully guaranteed for a period of 12 months from the date of delivery. We have an excellent track record for the reliability of all our products. However, in the unlikely event that you had a problem with an item within 12 months, you can return the item to us for investigation. If the item is in fact defective (excluding misuse), it would be repaired / replaced free of charge and returned to you free of charge. If the item is not defective, a report would be provided to the you and the goods returned to you. If you had a problem with an item after 12 months, then you could return it to us for checking and we would advise you of the cost of repair if required. We are available on the telephone Monday – Thursday 8am – 5pm and Friday 8am – 2pm to talk through your installation and give advice if needed.

Yes, for larger orders we can supply Units with bespoke lead lengths in Customer specified colours. We can fit Terminals and Connectors to suit the Customer’s individual needs – these can be free-issued to us or we can supply.

No, we value all Customers so we are happy to supply to an Individual as well as to Multi-National OEMs and Vehicle Manufacturers

Post 1

DC-DC Battery Chargers: Reliable Solutions from Emmtec

Post 3

DC-DC Voltage Converters: Reliable Solutions from Emmtec

Post 2

High-Quality DC Electronic Switches from Emmtec: Built for Performance and Reliability

Contact Us

We'd love to here from you. Give us a call or fill out the short contact form on the right and one of our team will be in touch shortly.

Contact details