This Unit provides a set voltage to switch a load of up to 1A.
The current drawn from the voltage source is < 0.5mA at the switching voltage.
The output switches On as the voltage rises and Off as the voltage falls.
The switch voltage can be set in the range 10.0V to 30.0V.
Supply Voltage (Vin): 10V to 32V
Output Current: 1A
Sense (Switch On) Voltage, factory setting: 26V (Voltage Rising)
Sense (Switch ON) Voltage, Adjustment Range: 10V to 30V
Sense Voltage Hysteresis: < 1% of Set Voltage
Sense Current: 0.4mA at Set Voltage
Connections Four Flying Leads: Red = Supply positive / Blue = Output / Yellow = Sense Input / Black = Sense negative / ground
Physical Dimensions: 62 x 42 x 13mm
Mountings Single: Ø 5mm Hole
Find out all the technical specifications and diagrams for each of our products
Other products you may be insterested in.
Whether your looking to place an order with us or have a technical question for the team, we're on hand to assist in any way we can.
Find out all the technical specifications and diagrams for each of our products
Yes, all products are manufactured are our factory in Wem, Shropshire
All goods are fully guaranteed for a period of 12 months from the date of delivery. We have an excellent track record for the reliability of all our products. However, in the unlikely event that you had a problem with an item within 12 months, you can return the item to us for investigation. If the item is in fact defective (excluding misuse), it would be repaired / replaced free of charge and returned to you free of charge. If the item is not defective, a report would be provided to the you and the goods returned to you. If you had a problem with an item after 12 months, then you could return it to us for checking and we would advise you of the cost of repair if required. We are available on the telephone Monday – Thursday 8am – 5pm and Friday 8am – 2pm to talk through your installation and give advice if needed.
Yes, for larger orders we can supply Units with bespoke lead lengths in Customer specified colours. We can fit Terminals and Connectors to suit the Customer’s individual needs – these can be free-issued to us or we can supply.
No, we value all Customers so we are happy to supply to an Individual as well as to Multi-National OEMs and Vehicle Manufacturers
We'd love to here from you. Give us a call or fill out the short contact form on the right and one of our team will be in touch shortly.